Price
TPR010 - RED Billet Valve Cover - RZR
TPR010 Billet Valve Cover -
All TPR Polaris valve covers come standard with camshaft oilers. Polaris engines live in very high RPM ranges and often run into oiling issues. These cam oilers will help maximize the life of all your overhead valve train components through the harshest engine laboring and high heat conditions. With our billet valve cover you'll have the choice to run your stock spark plug wires, Pro XP / Turbo R coils, MSD Performance Coils, and our Full Flow water kit (TPR010W).
Full Flow Water Kit Option -
(Sold separately - TPR010W) Using this valve cover will also allow you run our full flow water kit design that eliminates the death air pocket that can form in the upper portion of the cylinder head water jacket causing 80% of all head gasket failures and plumbs right into your radiator return line hose. After installing this water kit you'll be able to bleed your coolant from back right of the car in a Head-Ache free area. In pictures above you can see where the water spud from this kit comes through the valve cover.
Valve Cover Kit Includes -
- Polaris replacement bolt grommets
- (1) 6mm ARP bolt
- MSD Coils w/ wire harness (If selected)
- Cam oiler line
Fits Polaris RZR models -
- XP1000
- XPTurbo
- XPTurbo-S
- RS1
Heat shield modifications -
If you buy a kit with MSD coils or a full flow water kit and carry a lot of weight in your bed you might need to do some heat shield modifications. The factory beds are very flexible and extra weight may cause heat shield to contact the MSD coils and possibly ruin them. Modifications can be made with the following holesaw sizes and measurements in the picture below.
|
Ignition Code Dwell Table -
MSD coil kits may experience a cold start ignition code, this is due to a variance in ignition dwell timing maps in aftermarket tuners. After a few minutes of engine running the code will usually go away. We have seen about 10% of our customers reporting a cold start code with an aftermarket tune. We have designed a new ignition dwell map that will fix this problem, any shop that has access to your tune can easily load this new dwell table into your machine.
Polaris MSD ignition dwell table running stock ECU with tuner -
7 volt - 8.3 ms
8 volt - 5.8 ms
10 volt - 3.4 ms
12 volt - 2.25 ms
14 volt - 1.75 ms
16 volt - 1.5 ms
18 volt - 1.3 ms
For aftermarket ECU and drivers you can run a maximum dwell of 3.4 ms @14V
Increase or decrease by .2 to .4 ms per volt with a maximum of 4.2 ms
Custom colors and logos -
Please call (619) 562-9894 or email [email protected]
Custom colors and logos have a 2 week lead time.
GUARANTEED SAFE CHECKOUT
24 Hours Cancellation
We accept order cancellation before Within 24 hours the product is shipped. If the order is cancelled you will get a full refund.
30 Days Returns & Exchanges Policy
If for any reason you are not satisfied with the purchased item,You have 30 days after delivery of your order to return an item.
After 30 days of delivery of your order, we will no longer accept returns.
Refund Process & Return conditions:
To request a return,please email us at:[email protected] ,We will respond within 24 hours after
the consumer sends the email (except weekends).
If it is a quality issue, please
provide an order number and attach clear photos of the items that represent the
issue.
After we receive the returned order, our Quality Assurance department will
inspect and verify the condition of the item.Upon acceptance of your return, a refund
will be issued to the original form of payment within 1-3 business days.
Make sure your item meets all our return conditions :
Items returned without authorization will not be accepted.
The time frame for return
must not exceed 30 days from when the original order was received.
Any promotional
gifts must also be returned with your returned item.
All items must be returned in
their original condition, without scratches or signs of wear, and must not be resized or
altered in any way.
Your return needs to be sent within the given time frame(3-12
working days)
Please make sure you provide us the tracking# and receipt after you
return.
Refunds
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, we will credit the credit limit to your credit card or original payment method within 5 business days (bank processing time frame).
MORE FROM talon bolt kits
